Installer
Toolkit
for Impulse.
Everything an installer needs to configure, verify, and complete an Impulse cooktop installation — from countertop cutout specs to electrical requirements and step-by-step guidance.
Installation Type
Oven Underneath Impulse Installation
Paired setup for Impulse cooktop with a wall oven below. Covers combined load and clearance requirements.
Range Replacement
Retrofit configuration for replacing a freestanding gas or electric range with Impulse.
Standard In-Counter Installation
Drop-in configuration for standard countertop cutouts with no structural modifications required.
Range Replacement
Replacing a freestanding range is a common installation type. We approach it in three parts: the range frame or cabinet, the range top and the range appliance (or fill).
We most commonly see ranges being replaced with a wooden sink base with an oven installed and an Impulse cooktop above.
Below, you will learn about each part of the range replacement installation.
Wooden Cabinet Base
Range Top Trim Kit
Appliance Stacking
For appliances underneath, you can start with a sink base as the frame and make modifications as needed for appliances. You can find basic sink bases at Home Depot or other big box retailers.
Shop Sink Bases at Home Depot